Cypress App

Overview

Cypress runs tests in a unique interactive application that allows you to see commands as they execute while also viewing the Application or Component Under Test.

Cypress App

Command Log

The lefthand side of the Cypress App is a visual representation of your test suite. Each test block is properly nested and each test, when clicked, displays every Cypress command and assertion executed within the test's block as well as any command or assertion executed in relevant before, beforeEach, afterEach, and after hooks.

Cypress App

Open files in your IDE

There are some places in the Command Log that display a link to the relevant file where the code is located. Clicking on this link will open the file in your preferred file opener.

Open file your IDE

Time Traveling

Each command and assertion, when hovered over, restores the Application or Component Under Test (righthand side) to the state it was in when that command executed. This allows you to time travel back to previous states when testing.

In the following example, hovering over the CONTAINS command in the Command Log changes the state of the Cypress App:

Hovering over the contains tab highlights the dom element in the App in the Cypress App

Cypress automatically travels back in time to a snapshot of when a hovered-over command resolved. Additionally, since cy.contains() finds DOM elements on the page, Cypress also highlights the element and scrolls it into view (to the top of the page).

Also note that as we hover over the CONTAINS command, Cypress reverts back to the URL that was present when the snapshot was taken.

The url address bar shows https://example.cypress.io/

Pinning Snapshots

Each command, assertion, or error, when clicked on, displays extra information in the dev tools console. Clicking also pins the Application or Component Under Test (righthand side) to its previous state, or snapshot, when the command executed.

In the following example, clicking on the CLICK command highlights it in purple, and does three other things worth noting:

A click on the click command in the Command Log with Cypress App labeled as 1, 2, 3

1. Pinned snapshots

We have now pinned this snapshot. Hovering over other commands will not revert to them. This gives us a chance to manually inspect the DOM of our application under test at the time the snapshot was taken.

2. Event hitbox

Since .click() is an action command, that means we also see a red hitbox at the coordinates the event took place.

3. Snapshot menu panel

There is also a new menu panel. Some commands (like action commands) will take multiple snapshots: before and after. We can now cycle through these.

The before snapshot is taken prior to the click event firing. The after snapshot is taken immediately after the click event. Although this click event caused our browser to load a new page, it's not an instantaneous transition. Depending on how fast your page loaded, you may still see the same page, or a blank screen as the page is unloading and in transition.

When a command causes an immediate visual change in our application, cycling between before and after will update our snapshot. We can see this in action by clicking the TYPE command in the Command Log. Now, clicking before will show us the input in a default state, showing the placeholder text. Click after will show us what the input looks like when the TYPE command has completed.

Page events

In addition to showing all the commands that were called, the command log also shows important events from your application or component when they occur. Notice these look different (they are gray and without a number).

Command log shows 'Page load --page loaded--' and 'New url https://example.cypress.io/'

Cypress logs out page events for:

  • Network XHR Requests
  • URL hash changes
  • Page Loads
  • Form Submissions

Instrument Panel

For certain commands like cy.intercept(), cy.stub(), and cy.spy(), an extra instrument panel is displayed above the test to give more information about the state of your tests.

Routes

Routes Instrument Panel

Stubs

Stubs Instrument Panel

Spies

Spies Instrument Panel

Preview Pane

The righthand side of the Cypress App is where the Application or Component Under Test is rendered.

Application Under Test
End-to-End Only

In End-to-End testing, the righthand side of the Cypress App is used to display the Application Under Test (AUT): the application that was navigated to using a cy.visit() or any subsequent routing calls made from the visited application.

In the example below, we wrote the following code in our test file:

cy.visit('https://example.cypress.io')

cy.title().should('include', 'Kitchen Sink')

In the corresponding Application Preview below, you can see https://example.cypress.io is being displayed in the righthand side. Not only is the application visible, but it is fully interactable. You can open your developer tools to inspect elements as you would in your normal application. The DOM is completely available for debugging.

Application Under Test

The AUT also displays in the size and orientation specified in your tests. You can change the size or orientation with the cy.viewport() command or in your Cypress configuration. If the AUT does not fit within the current browser window, it is scaled appropriately to fit within the window.

The current size and scale of the AUT is displayed in the top right corner of the window.

The image below shows that our application is displaying at 1000px width, 660px height and scaled to 100%.

Viewport Scaling

Note: The righthand side may also be used to display syntax errors in your test file that prevent the tests from running.

Errors

Note: Internally, the AUT renders within an iframe. This can sometimes cause unexpected behaviors explained here.

Component Under Test
Component Only

In Component testing, the righthand side of the Cypress App is used to display the Component Under Test (CUT): the component that was mounted using the cy.mount() command.

In the following example, taken from the Writing Your First Component Test guide, we wrote the following test in our spec file:

it('should have password input of type password', () => {
  mount(<LoginForm />)
  cy.contains('Password').find('input').should('have.attr', 'type', 'password')
})
it('should have password input of type password', () => {
  mount(LoginForm)
  cy.contains('Password').find('input').should('have.attr', 'type', 'password')
})

In the corresponding Component Preview below, you can see the the LoginForm component is being displayed in the righthand side. Not only is the component visible, but it is fully interactable. You can open your developer tools to inspect elements as you would in your normal application. The DOM is completely available for debugging.

(SCREENSHOT OF TEST RUN WITH COMPONENT RENDERED)

The CUT also displays in the size and orientation specified in your tests. You can change the size or orientation with the cy.viewport() command or in your Cypress configuration. If the CUT does not fit within the current browser window, it is scaled appropriately to fit within the window.

The current size and scale of the CUT is displayed in the top right corner of the window.

The image below shows that our application is displaying at 1000px width, 660px height and scaled to 100%.

(CROPPED SCREENSHOT OF VIEWPORT SIZE)

Note: The righthand side may also be used to display syntax errors in your spec file that prevent the tests from running.

(SCREENSHOT OF AN ERROR APEARING ON THE RIGHT SIDE)

Note: Internally, the CUT renders within an iframe. This can sometimes cause unexpected behaviors explained here.

Selector Playground

The Selector Playground is an interactive feature that helps you:

  • Determine a unique selector for an element.
  • See what elements match a given selector.
  • See what element matches a string of text.

Uniqueness

Cypress will automatically calculate a unique selector to use targeted element by running through a series of selector strategies.

By default Cypress will favor:

  1. data-cy
  2. data-test
  3. data-testid
  4. id
  5. class
  6. tag
  7. attributes
  8. nth-child

Best Practices

You may find yourself struggling to write good selectors because:

  • Your application or component uses dynamic ID's and class names
  • Your tests break whenever there are CSS or content changes

To help with these common challenges, the Selector Playground automatically prefers certain data-* attributes when determining a unique selector.

Please read our Best Practices guide on helping you target elements and prevent tests from breaking on CSS or JS changes.

Finding Selectors

To open the Selector Playground, click the button next to the URL at the top of the Cypress App. Hover over elements in your app to preview a unique selector for that element in the tooltip.

Opening selector playground and hovering over elements

Click on the element and its selector will appear at the top. From there, you can copy it to your clipboard ( ) or print it to the console ( ).

Clicking an element, copying its selector to clipboard, printing it to the console

Running Experiments

The box at the top that displays the selector is also a text input.

Editing a Selector

When you edit the selector, it will show you how many elements match and highlight those elements in your app.

Type a selector to see what elements it matches

Switching to Contains

You can also experiment with what cy.contains() would yield given a string of text. Click on cy.get and switch to cy.contains.

Type in text to see which element it matches. Note that cy.contains() only yields the first element that matches the text, even if multiple elements on the page contain the text.

Experiment with cy.contains

Disabling Highlights

If you would like to interact with your app while the Selector Playground is open, the element highlighting might get in the way. Toggling the highlighting off will allow you to interact with your app more easily.

Turn off highlighting

Keyboard Shortcuts

There are keyboard shortcuts to quickly perform common actions from within the Cypress App.

KeyAction
rRerun tests
sStop tests
fBring focus to 'specs' window
Tooltips show keyboard shortcuts

Debugging

In addition to the features already mentioned, Cypress comes with a host of debugging tools to help you understand a test. You can:

Errors

Cypress prints several pieces of information when an error occurs during a Cypress test.

  1. Error name: This is the type of the error (e.g. AssertionError, CypressError)
  2. Error message: This generally tells you what went wrong. It can vary in length. Some are short like in the example, while some are long, and may tell you exactly how to fix the error.
  3. Learn more: Some error messages contain a Learn more link that will take you to relevant Cypress documentation.
  4. Code frame file: This is usually the top line of the stack trace and it shows the file, line number, and column number that is highlighted in the code frame below. Clicking on this link will open the file in your preferred file opener and highlight the line and column in editors that support it.
  5. Code frame: This shows a snippet of code where the failure occurred, with the relevant line and column highlighted.
  6. View stack trace: Clicking this toggles the visibility of the stack trace. Stack traces vary in length. Clicking on a blue file path will open the file in your preferred file opener.
  7. Print to console button: Click this to print the full error to your DevTools console. This will usually allow you to click on lines in the stack trace and open files in your DevTools.
example command failure error

Console output

Besides Commands being interactive, they also output additional debugging information to your console.

Open up your Dev Tools and click on the GET for the .action-email class selector.

Cypress App with get command pinned and console log open showing the yielded element

We can see Cypress output additional information in the console:

  • Command (that was issued)
  • Yielded (what was returned by this command)
  • Elements (the number of elements found)
  • Selector (the argument we used)

We can even expand what was returned and inspect each individual element or even right click and inspect them in the Elements panel!

Special commands

In addition to having a helpful UI, there are also special commands dedicated to the task of debugging, for example:

In the following example, we've added a cy.pause() command to this test:

describe('My First Test', () => {
  it('clicking "type" shows the right headings', () => {
    cy.visit('https://example.cypress.io')

    cy.pause()

    cy.contains('type').click()

    // Should be on a new URL which includes '/commands/actions'
    cy.url().should('include', '/commands/actions')

    // Get an input, type into it and verify that the value has been updated
    cy.get('.action-email')
      .type('fake@email.com')
      .should('have.value', 'fake@email.com')
  })
})

Now, when the test runs, Cypress provides us a UI (similar to debugger) to step forward through each command in the test.

Cypress App shows label saying 'Paused' with Command Log showing 'Pause'

In action:

History

VersionChanges
3.5.0Added keyboard shortcuts to Cypress App
1.3.0Added Selector Playground